0
about help
0
Whiteboards
Peel & Stick
Restickable
Organizers
Sticky Notes
Dry Erase Paint
White Dry Erase Paint
Transparent Dry Erase Paint
Custom Whiteboards
Custom Size
Bulk Orders
Accessories
Dry Erase Markers
Chalk Markers
Cleaning Cloth
Remooble Cleaner
Writey Gift Card
installation
about
contact
help
copyright © 2024 writey
privacy policy

we’ve got the WRITE answers

anything you need to know, if you don’t know

• INSTALLATION

 

Is there any prep involved?
If the surface is textured we recommend lightly sanding to as smooth a finish as possible. Please ensure the surface has had adequate dry time (approx. 30 days). Lightly misting the surface or adhesive backside prior to installation may be helpful in the eventuality of air bubbles.
For any size above 2’x3’ we recommend at least 2 installers. 3 people may be necessary to install the largest sizes.
Yes, however exposure to the elements will reduce performance, adhesion, and product longevity.
Yes, please note that if you ever remove it from unfinished wood that the wood may splinter when removing.
Yes, provided it is smooth. The metal will also retain most of its magnetism.
Be sure to mist the area with spray cleaner and then use the provided squeegee or rag/towel to squeeze the air out towards the edge. The liquid helps slide the air out.

Original Stickon Instructions

Restickable Instructions

• REMOVING

 

Please ensure paint has had adequate dry time (approx. 30 days). With the use of a hairdryer, heat the WriteyBoard to excite the adhesive to allow for easier release from the substrate. Slowly peel away from surface avoiding ripping or tugging abruptly as this may cause surface damage.

The original classic stick on whiteboards (classic, XL, matte, and black) should be thought of as a semi-permanent solution.  Once installed, the adhesive is designed to support the board for years.  At the end of a WriteyBoard's life, the material can be peeled away and discarded.  Please find Removal instructions with these FAQs. The Premium Re-Stickable whiteboards are the only whiteboards that are removable & reusable for multiple applications.

The adhesive is designed to peel away from a wall that is 100% complete and sealed (aka a wall with primer and paint) without ripping paint or leaving behind sticky residue. However, due to our inability to predict the structural integrity of individual surfaces we cannot guarantee that removal will not result in damage. Since each installation is subjective we cannot guarantee the outcome and recommend testing in an inconspicuous area prior to application.

• WRITE & ERASE

 

Any variety of dry-erase markers or dry-erase crayons can be used. In the event of a permanent marking Goof-Off or comparable aerosol spray cleaner can be used to aid in removal.

For more residual markings use a spray cleaner (available for purchase on our site). You can also use Windex, 409, or any other comparable product.

We recommend a micro-fiber cloth or standard whiteboard eraser.

• GENERAL

 

WriteyBoards are dry-erase boards with an adhesive backside designed to be stuck onto a surface

DETAILED DESCRIPTION

They can be applied to virtually any surface, however a FLAT SMOOTH SURFACE is strongly recommended for best results.

Each WriteyBoard comes with a 2 Year Warranty but can in all likelihood still perform well beyond that.

0.18 mm, or about as thick as a few sheets of paper. They will reflect the condition of the surface to which they are adhered.

They are available in White (glossy) White Matte (flat) Ghost (transparent) and Midnight (black).

They themselves are not, however if placed over a magnetic surface the strength of the magnetism would only be moderately affected.

WriteyBoards come rolled up in a stylish tube which is then removed and unraveled.

ORIGINAL WRITEYBOARD MATTE WHITE

ORIGINAL WRITEYBOARD WHITE

ORIGINAL WRITEYBOARD TRANSPARENT

PREMIUM WRITEYBOARD